Scroll Top
صنعاء - أمام فندق حدة
01-432343

معامل كلية العلوم الطبية

Lab identify

معامل العلوم الطبية المتواجدة في كلية العلوم الطبية -الجامعة اليمنية الأردنية، تحوي أهم الأجهزة والتقنيات الحديثة لخدمة الطلاب والباحثينفي المجال التعليمي والبحثي والتطبيقي. والتي تم الحرص من المسؤولين في إدارة الجامعة على تزويد المعامل بها لتلبية إحتياجات خدمة المجتمع ومواكب التطور العلمي والرقي بالجامعة في سبيل تحقيق أهدافها في خدمة المجتمع.

امكانيات وتجهيزات ومعدات ضخمة ومتكاملة تمتلكها الجامعة اليمنية الاردنية في دائرة معامل كلية العلوم الطبية

المواصــــــــفات العامة للمعامل

بعض التعريفات المهمة :  

  • المختبر : يقصد به البناء والفراغ والمعدات والعمليات الجارية ضمنها .
  • المختبرات الاساسية: يقصد بها المختبرات والمعامل التي تستخدم في الكليات الطبية والتطبيقية والتي يستخدمها الطلاب لاجراء تجاربهم

* تصنف المخاطر المتوقعة من هذه المختبرات بالصنف الاول( Class A) والتي يقصد بها ان الاصابة المتوقعة تحدث للشخص العامل في المختبر ولا تنتقل من خلاله الى المجتمع حيث لايكون مصدرا للعدوى

 

  • وحدة المختبر : أي فراغ محاط ويستخدم للتجارب والتحاليل ويمكن أن يحتوي على ممرات أو طوابق أو مكاتب للعاملين في الوحدة أو لا يحتوي على ذلك .
  • مكان المختبر في العمل : الغرفة أو الفراغ المستخدم للاختبار والفحوصات والتجارب و التدريب والأبحاث أو أي نشاط يشمل استخدام الكيماويات ويمكن أن يكون مغلق أو مفتوح.
  • الجهاز : الأثاث .. شافطات الأبخرة ، الطاردات المركزية الثلاجات وكافة المعدات المصنعة و المستخدمة داخل المختبر

المواصفات العامة المتوفرة للمعامل والمختبرات الطبية

يشترط في المختبرات والمعامل البحثية والطبية في الكليات العملية والتطبيقية والمراكز الطبية والبحثية أن تكون بمواصفات معينة لكي تكون مناسبة للاستخدام وتمتلك مستوى معين من الامان ولهذا يجب مراعاه ضرورة تطبيق المواصفات والمقاييس الاساسية الوجب توفرها في المعامل والمختبرات الطبية والتي تتطلبها منظمة

(International Laboratory Accreditation Cooperation(ILAC  وكذلك 

 American Association for Advancement of Science  والتي تصدر كتابا سنويا باسم

The Guide to Scientific Instruments

Annual Directory of Medical Laboratory Management

اولاً: التجهيزات الاساسية للمعامل (المختبرات) الطبية

من أهم النقاط الضرورية في تصميم المختبرات الأساسية ما يلي:

أولاً: أبعاد المختبر (مساحة المختبر)

1- تختلف حسب طبيعة المختبر وفي كل الاحوال يجب أن لا تقل مساحة المختبر عن 7*9 م2

2- ترك ممرات فرعية بين البنشات أو طاولات العمل لا يقل عرضها عن متر واحد وممر رئيسي لا يقل عرضة عن متر ونصف داخل المعمل

3- ينبغي توفير مكان فسيح من أجل القيام بالأعمال المختبرية بشكل امن.

ثانياً: ديكور المعمل (المختبر)

يجب أن يصمم المختبر بشكل يساعد على سهولة تنظيفه. ويعتبر وجود سجاجيد أو أبسطه على أرضية المعمل (المختبر) أمراً مخالفاً لشروط تصميم المعمل (المختبر) ومن أهم الاعتبارات الواجب الانتباه لها:

ينبغي أن يكون السقف والارض والجدران ملساء سهلة التنظيف، غير منفذه للسوائل ومقاومة للكيمياويات والمطهرات التي تستخدم في المختبر، كما يجب ان تكون الارض مانعة للانزلاق

يفضل أن تكون الارضية مغطاه بطبقة من الايبوكسي (Epoxy) مقاومة للمواد الكيميائية وبسمك لا يقل 400 ميكرون وأن تطلى الجدران بنفس الطبقة بسمك لا يقل عن 200 ميكرون

ينبغي أن تكون الابواب من النوع الذي ينغلق اليا و مقاومة للحريق لمدة لاتقل عن ساعة

النصف العلوي من أبواب المختبر يجب أن يكون مصنوع من الزجاج المقاوم للكسر نصف شفاف بحيث يمكن النظر من خلاله ، كما يجب تعليق شارة التحذير من المخاطر في أبواب المختبر إعتمادا على طبيعة المخنبر

ثالثاً: نظام التهوية

 

مع إنه لا توجد متطلبات خاصة بالتهوية في هذا النوع من المختبرات (الاساسية) ولكن حين يتم تصميم المعمل لابد من يؤخذ في الاعتبار توفير جهاز تهوية ميكانيكي يزود بجريان الهواء الى الداخل وبمخرج للهواء بحيث لايسمح بعودة الهواء الى المختبر، وإذا لم تتوفر تهوية ميكانيكية فينبغي أن تكون النوافذ قابلة للفتح بسهولة على أن تكون مزودة بشبك يمنع دخول الذباب والحشرات.

رابعــاً: تجهيزات الاضاءة و الكهرباء

 

يجب توفير مصدر كهرباء يمكن الاعتماد عليه ويكون ذا طاقة كافية كما يجب توفير كهرباء في الطوارىء لتسهل الخروج من المبنى بسلام ويفضل توفير مولد إحتياطي لتغذية التجهيزات الأساسية كالحاضنات الثلاجات والمجمدات وما إليها في حالة إنطفاء الكهرباء لفترات طويلة. كما يجب الاخذ بالاعتبارت التالية:

يجب توفير الإضاءة الملائمة لجميع أنشطة المعمل (المختبر) مع تجنب الانعكاسات والأضواء المبهرة التي قد تعوق الرؤية.

يجب أن تكون الوصلات الكهربائية ذات مقاومة عالية تتناسب مع الاجهزة التي تعمل عليها وينبغي توفرعدد كافي من النقاط الكهربائية على جدران المختبر وطاولات المحاضر (بنش المعلم) والطلاب

النقاط الكهربائية يجب ان تكون في أماكن بعيده عن المياه والغاز

يجب أن لا تمر أسلاك الكهرباء والغاز بجوار بعض في داخل التجويف الحديدي للبنش الوسطي لمنع حدوث أي شرر كهربائيا

ينبغي تثبيت نقاط كهربائية على جدران المعمل (بخلاف المثبتة على البنشات) مخصصة للأجهزة التي تحتاج لخطوط منفصلة أو جهد عالي مثل الثلاجة والاتوكلاف والسخان الحراري والاجهزة التي تتطلب 3 Vise

 

خامســاً: التجهيزات الخاصة بشبكة الغاز

من الضروري توفير تمديدات الغاز لكل مناطق العمل  .ولابد من ضمان صيانة مناسبة لهذه التمديدات.

الأنابيب والمواسيرالخاصة بالغاز ينبغي أن تكون مخفية وغير مكشوفة

يفضل أن يكون نظام الغاز مركزي وأن يتوفر مفتاح الغاز بمكان خارج كل معمل بمكان واضح يسهل الوصول اليه عند الحاجة.

سادســاً: تمديدات المياه والصرف الصحي

يجب أن يزود كل مختبر بتمديدات المياه والصرف اللازمة

الأنابيب والمواسير المكشوفة ينبغي أن تكون متميزة عن الجدران ويجب إجتناب المجاري الافقية تحاشيا لتراكم الغبار وترسب المواد الكيميائية وبالتالي إغلاقها.

يجب أن يؤخذ في الاعتبار توفر مواسير للمياه الباردة وأخرى للحارة وغيرها لمغسلة العين (المواسير الخاصة بمغسلة الغين يجب أن تكون موصلة بسخان حراري بحيث لا تتجاوز درجة حرارة المياه في المغسلة الخاصة بالعين عن 37 درجة مئوية)

يجب أن تكون مواسير الصرف الصحي موصلة مباشرة الى المغاسل بشكل راسي دون الحاجة لان تكون فيها حوض للتجميع (كما في المغاسل المتوفرة في المنازل ) لمنع إنسدادها.

 

سابعــاً: الملحــــقات

1) غرفة التحضير

يجب توفر غرفة تحضير في كل معمل وهي عبارة عن معمل مصغر لا تقل مساحتها عن 3*4م2 وأن تزود بكافة التجهيزات اللازمة من الكهرباء والمياه والصرف الصحي ومعدات السلامة اللازمة.

2)مخزن

يجب توفير مخزن ملحق بالمعمل يكون كافي لاستيعاب ما يلزم من معدات للاستعمال المباشر بحيث لايكون هنالك داعي لتكويم الأثاث على أسطح البنشات أو في مناطق العمل كما يجب توفر الاماكن والمرافق اللازمة لتخزين وتداول المذيبات والمواد المشعة والغازات المضغوطة بشكل مامون

يجب توفير أبواب محكمة الإغلاق لملحقات المعمل (المختبر) التي تحوى مواد بيولوجية يمكن التحكم بها.

 

ثامنــاً: معدات السلامة  والامان المعملي

يجب توفر أماكن خاصة لوضع الملابس والاكل والشرب خارج منطقة العمل

يجب أن يكون المعمل مجهز بمخارج طوارىء يفتح أحدهما على ساحة واسعة

يجب أن تشتمل أجهزة السلامة مكافحة الحريق وحوادث الكهرباء بالإضافة الى وابل إسعافي ووسائل لغسل العين

ينبغي أن تتوافر مناطق أو غرف للاسعاف الاولى مجهزة تجهيزا ملائما ويسهل الوصول اليها

من الضروري توفير ماء كافي جيد وموثوق وينبغي أن لايكون هنالك اتصال بين مصادر الماء المستعمل في الاغراض المعملية وبين ماء الشرب ويجب وقاية شبكة المياه بصمام يمنع رجوع ماء المختبر اليها

لابد أن يحتوى كل معمل على حوض لغسل الأيدي بخلاف الحوض المخصص للتخلص من سوائل الجسم والمواد الكيماوية.

يجب مكافحة القوارض بشكل مستمر وأن يمنع دخولها الى المعمل وذلك بتزويد المعامل بأبواب قوية وحواجز حديدية.

 

أجهزة ومعدات السلامة :
يجب أن يتوفر المختبر

نظام إنذار جماعي ذو أزرار خارج غرف المختبرات لكافلة العاملين في المبنى .

نظام إنذار خصوصي لكل مختبر   .

إشارات تحذيرية في أماكن الكيماويات الخطرة ( السامة والقابلة للاشتعال، حاملات القناني الزجاجية المحتوبة على مواد خطرة .

يجب أن يحتوى المعمل على صندوق للاسعافات الاولية.

معدات مكافحة الحرائق :

يجب توفر طفايات حريق كافية لكل مختبر وبالقرب من مخر المختبر ومعروفة للجميع حتى مع أنظمة أوتوماتيكية

يجب تدريب العاملين في كل مختبر على إستخدام الطفايات الخاصة بالحرائق .
يجب توفير بطانية حريق ( مصنوعة من الصوف 100% وإستبعاد الاسبست) في كل مختبر وفي مكان بارز ومعروف مع وجود إشارة توضيحية .

 

تاسعـاً: معدات التخلص من النفايات الطبية

يجب توفير أحواض الغسيل مع الماء الجاري إن أمكن في كل غرفة من غرف المعمل والافضل أن تكون قرب مخرج هذه الغرف

يجب أن يتوفر جهاز الاتوكلاف أو ما يقوم مقامه في نفس المختبر للتخلص من الفضلات المعدية (مختبرات الميكروبيولوجي والدم والكيمياء حيوية)

هنالك ثلاث معدات للتخلص من الفضلات تحتاج الى انتباه خاص لتلبية احتياجيات مكافحة التلوث وهي:

الاتوكلافات لمعالجة النفايات الصلبة

المياه والنفايات السائله تحتاج الى معالجة خاصة قبل التخلص منها

المحرقة ويجب أن تزود بادوات مصفية للدخان

 

ثانياً: أثاث وأجهزة  المعامل 

يشترط في الاثاث المستخدم في المعامل (البنشات والطاولات) الطبية أن يكون كما يلي:

لابد أن يكون أثاث المعمل (المختبر) مجهزاً بحيث يلائم نوعية الاستخدام والحمولة المتوقعة. كما يجب توفير مساحات تفصل بين طاولات المعمل (المختبر) والكبائن والمعدات لتسهيل عملية التنظيف فيما بينها. ولابد أن يتم تغطية الكراسي وغيرها من أثاث المعمل (المختبر) بمادة غير نسيجية لتسهيل عملية تعقيمها.

أن تكون أسطح طاولة المعمل (المختبر) مقاومة للماء وللحرارة المعتدلة وللمذيبات العضوية والأحماض والقلويات والمواد الكيماوية المستخدمة في تعقيم أسطح ومعدات العمل (جدول 3).

يجب أن لا ترتفع خزانات وكبائن حفظ المواد عن مستوى النظر وأن تترك أمامه منطقة للحركة لا تقل عن متر (جدول 2).

يجب تركيب كبائن الأمان البيولوجي بطريقة لا تسمح للتقلبات التي تحدث في الهواء الداخل إلى الحجرة والخارج منها بالتسبب في إخراج كبائن الأمان البيولوجي عن نطاق التحكم الذى تعمل به. كما يجب تركيب كبائن الأمان البيولوجى بعيداً عن الأبواب والنوافذ التي يمكن فتحها وعن أماكن المعمل (المختبر) المزدحمة بالحركة وعن أى معدات أخرى قد تسبب إعاقة حركة تدفق الهواء بكبائن الأمان البيولوجى.

أن تتوفر فيه الادراج والدواليب والكبائن المخصصة لكل لحفظ المحاليل والمواد الكيميائية والأصباع والأجهزة والميكروسكوبات بحيث يتم ترتيبها وفق الية معينة وتكتب من الخارج قائمة بمحتويات كلا منها

أن تكون مجهز بمقاعد مريحة وسهلة الحركة ويمكن التحكم في إرتفاعها حسب طول الطالب

يجب أن لا تكون المادة المستخدمة لتغطية الخشب المكون للكبائن الميلامين الابيض لان هذه المادة لها قابلية عالية لإدمصاص المواد والكواشف الملونة على سطحها ويصعب إزالتها بالأحماض لانها غير مقاومة

التوصيلات التي تستخدم لربط الأبواب لكبائن التخزين يجب أن تكون من النوع المقاوم والغيرقابلة للصداء

FUME HOOD كبائن الغازات يجب أن تكون:

السطح الداخلي العلوي لهذه الكبائن مغطى بالكربون النشط الذي يعمل على إدمصاص للغازات المتصاعدة

مفاتيح الاضاءة الكهربائية يجب أن تكون موضوعة من الخارج لمنع حدوث الخطر نظرا لتفاعل الغازات المتصاعدة مع الكهرباء كما يجب ان يكون موقع اللمبة بعيدا عن اللهب بداخل الكبائن لمنع حدوث الحريق بطريقة مباشرة (في حالة وقوع اللمبة فوق مستوى اللهب مباشر)

يجب أن تكون الكبائن المصممة ذات أنواع كفوءة لعملية الشفط وطرد الغازات

الزجاج الخارجي لنوافذ الكبائن يجب أن يكون محكم بما يفي بطول الاستخدام

يجب ان تكون ابواب كبائن التخزين مزودة باقفال بحيث يمكن قفلها وقت الحاجة.

يجب توفير مكان لتنظيف العيون (مغسلة عين لغسلها في حالة إصابتها بالرذاذ) على كل بنش توضع بجوار مغسلة البنش.

المواصفات الخاصة بالبنشات والطاولات موضحه في الجدول رقم (2)

LABORATORIES FURNATURE

Model No. Item                             Specification (L*D*H)
 

 

 

 

 

 

 

 

1st

 

SLIDE BENCH

 

1. Metal Frame

C- Shaped frame, made from mild steel tube (60×40×1.5mm) thickness  and must be hidden, coating with epoxy resin powder, have excellen resistant to a wide variety of chemical and reagent. Furthermore heat resistant even to liquid solder

2. Table work top

Should be made up of Epoxy (black color) resin 15±1 mm thickness, excellent resistant to a wide variety of chemical and reagent such as concentrated inorganic acids, organic acids, alkali, peroxide and organic solvent, in addition to reagent such as Giemsa, Gentian stain and cresol red. All these items will be tested.

3. Base cabinet

a)          Made from 18±2mm thick melamine plywood edged 3mm PVC in inter and outer of the cabin and shelf, 4 swivel caster in lower parts

b)         The doors of cabins: hidden handgrip of door, can be closed automatically, fitted with the locks coated with resistant material for chemicals and hot spots.

c)          The door hinges: DTC brand, must be open and close automatically, adjusted multi-functions by 3d.

d)         Drawer Guiding Slides: good quality and without noise

e)          Socket: 4 pcs, engineering plastic material

All the above component must include accordance with the international specifications

 

 

 

 

 

 

 

 

2nd

 

 

ISLAND BENCH

1.     The metal Frame

C- Shaped frame, made from mild steel tube (60×40×1.5 mm) thickness  and must be hidden, coating with epoxy resin powder, has excellen resistant to a wide variety of chemical and reagent. Furthermore heat resistant even to liquid solder

2.     Table work top

Should be made up of Epoxy (black color) resin 15±1 mm thickness, excellent resistant to a wide variety of chemical and reagent such as concentrated inorganic acids, organic acids, alkali, peroxide and organic solvent, in addition to reagent such as Giemsa, Gentian stain and cresol red. All these items will be tested.

3.     Reagent racks

    Be made of 1.2 mm cold-rolled steel, covered with EPOXY RESIN powder static painting to resist acid and alkali and stand heat, two shelves of frosted glass with guardrail of steel tube.

4.     Base cabinet:

a)     made from 18mm thick melamine plywood edged 3mm PVC in inter and outer of the cabin and shelf, 4 swivel caster in lower parts

b)    The doors of cabins: hidden handgrip of door, can be closed automatically, fitted with the locks coated with resistant material for chemicals and hot spots.

c)     The door hinges: DTC brand, 270o, 100000 life cycle, can open and close automatically, adjusted multi-functions by 3d.

d)    Drawer Guiding Slides: good quality and without noise

e)    Socket: 4 pcs, engineering plastic material

 

 

 

 

 

 

2nd

 

 

 

 

 

 

 

ISLAND BENCH

 

 

 

f)      Epoxy sink 465×395×300 mm, high grade PP, resistant to most chemicals, such as Aqua Regia, max thickness to 7mm don’t distort. Accessories: high grade PP over flow, stopper, filter-PP Basket trap.

–        Facute: (2 Faucet of 3 way (cold and Hot water) body: sold brass, coating high gloss epoxy powder, resistant to most chemicals, UV fading heating

–        Pegging Board: 2 piece outer diameter 400*120*550mm, high grade PP materials, single faced type

g)    Gas Outlet: 2 pcs, 2 way, body: solid brass, coating high gloss epoxy powder, resistant to most chemicals, UV fading, heating

h)     Eye washer: solid brass, coating high gloss epoxy powder, resistant to most chemicals, UV fading, heating,

–             Spray head: Soft rubber, softened water spray for eye protection

–             Dust cap: PP, removed automatically when wish is operated

–             Switch: automatic trigger locking for easy hand-free use

–             Valve: none- return valve, shut off automatically

–             Hose: length 105 m, PVC with stainless steel braided

All the above component must include accordance with the international specifications

Size mm850×1500×3000
Socket four Socket
Sink

 One Epoxy sink

(465×395×300 mm)

Fitting

 Two Faucet of 3 way

Two-way gas Faucet

Pegging Board Two PP Pegging Board
Eye Washing One Eye Washing

 

 

 

 

 

 

 

3rd

 

 

 

 

 

 

 

SLIDE

BENCH

WITH SINK

1.     The metal Frame:

C- Shaped frame, made from mild steel tube (60×40×1.5 mm) thickness  and must be hidden, coating with epoxy resin powder, have excellen resistant to a wide variety of chemical and reagent. Furthermore heat resistant even to liquid solder

2.     Table work top:

Should be made up of Epoxy (black color) resin 15 mm thickness, excellent resistant to a wide variety of chemical and reagent such as concentrated inorganic acids, organic acids, alkali, peroxide and organic solvent, in addition to reagent such as Giemsa, Gentian stain and cresol red. All these items will be tested.

3.     Base cabinet:

a)          made from 18mm thick melamine plywood edged 3mm PVC in inter and outer of the cabin and shelf, 4 swivel caster in lower parts

b)         The doors of cabins: hidden handgrip of door, can be closed automatically, fitted with the locks coated with resistant material for chemicals and hot spots.

c)          The door hinges: DTC brand, 270o, 100000 life cycle, can open and close automatically, adjusted multi-functions by 3d.

d)         Drawer Guiding Slides: good quality and without noise

e)          Socket: 4 pcs, engineering plastic material

 

 

 

 

 

 

 

3rd

 

 

 

 

 

 

 

 

 

 

    

SLIDE

BENCH

WITH SINK

f)           Epoxy Sink 465×395×300 mm, high grade PP, resistant to most chemicals, such as Aqua Regia, max thickness to 7mm don’t distort. Accessories: high grade PP over flow, stopper, filter-PP Basket trap.

–        Facute: (2) Faucet of 3 way (cold and Hot water) body: sold brass, coating high gloss epoxy powder, resistant to most chemicals, UV fading heating

–        Pegging Board: 2 piece outer diameter 400*120*550mm, high grade PP materials, single faced type

–        Gas Outlet: 2 pcs, 2 way, body: solid brass, coating high gloss epoxy powder, resistant to most chemicals, UV fading, heating

–        Eye washer: solid brass, coating high gloss epoxy powder, resistant to most chemicals, UV fading, heating,

–        Spray head: Soft rubber, softened water spray for eye protection

Dust cap: PP, removed automatically when wish is operated

Switch: automatic trigger locking for easy hand-free use

Valve: none- return valve, shut off automatically

Hose: length 105 m, PVC with stainless steel wire braided

All the above component must include accordance with the international specifications

Socket four Socket
Sink

 One Epoxy sink

(465×395×300 mm)

Fitting

 Two Faucet of 3 way

Two-way gas Faucet

Pegging Board Two PP Pegging Board

 

 

 

 

 

 

 

4th

 

CENTRAL BENCH

1.     The metal Frame

C- Shaped frame, made from mild steel tube (60×40×1.5 mm) thickness  and must be hidden, coating with epoxy resin powder, have excellen resistant to a wide variety of chemical and reagent. Furthermore heat resistant even to liquid solder

2.     Table work top

Should be made up of Epoxy (black color) resin 15 mm thickness, excellent resistant to a wide variety of chemical and reagent such as concentrated inorganic acids, organic acids, alkali, peroxide and organic solvent, in addition to reagent such as Giemsa, Gentian stain and cresol red. All these items will be tested.

3.     Base cabinet:

a)          made from 18mm thick melamine plywood edged 3mm PVC in inter and outer of the cabin and shelf, 4 swivel caster in lower parts

b)         The doors of cabins: hidden handgrip of door, can be closed automatically, fitted with the locks coated with resistant material for chemicals and hot spots.

c)          The door hinges: DTC brand, 270o, 100000 life cycle, can open and close automatically, adjusted multi-functions by 3d.

d)         Drawer Guiding Slides: good quality and without noise

e)          Socket: 4 pcs, engineering plastic material

All the above component must include accordance with the international specifications

 

 

 

 

 

 

5th

 

 

 

 

 

 

 

LECTURER

BENCH

1.     The metal Frame:

C- Shaped frame, made from mild steel tube (60×40×1.5 mm) thickness  and must be hidden, coating with epoxy resin powder, have excellen resistant to a wide variety of chemical and reagent. Furthermore heat resistant even to liquid solder

2.     Table work top:

Should be made up of Epoxy (black color) resin 15 mm thickness, excellent resistant to a wide variety of chemical and reagent such as concentrated inorganic acids, organic acids, alkali, peroxide and organic solvent, in addition to reagent such as Giemsa, Gentian stain and cresol red. All these items will be tested.

3.     Base cabinet:

a)          made from 18mm thick melamine plywood edged 3mm PVC in inter and outer of the cabin and shelf, 4 swivel caster in lower parts

b)         The color of outer and inner surface must be white with Black line

c)          The doors of cabins: hidden handgrip of door, can be closed automatically, fitted with the locks coated with resistant material for chemicals and hot spots.

d)         The door hinges: DTC brand, 270o, 100000 life cycle, can open and close automatically, adjusted multi-functions by 3d.

e)          Drawer Guiding Slides: good quality and without noise

4. Socket: 4 pcs, engineering plastic material

 

 

 

 

 

 

 

 

 

5th

 

 

 

 

 

 

 

 

LECTURER

BENCH

5. Epoxy sink: 465×395×300 mm, high grade PP, resistant to most chemicals, such as Aqua Regia, max thickness to 7mm don’t distort. Accessories: high grade PP over flow, stopper, filter-PP Basket trap.

–        Facute: (2) Faucet of 3 way (cold and Hot water) body: sold brass, coating high gloss epoxy powder, resistant to most chemicals, UV fading heating

–        Pegging Board: 2 piece outer diameter 400*120*550mm, high grade PP materials, single faced type

–        Gas Outlet: 2 pcs, 2 way, body: solid brass, coating high gloss epoxy powder, resistant to most chemicals, UV fading, heating

–        Eye washer: solid brass, coating high gloss epoxy powder, resistant to most chemicals, UV fading, heating,

Spray head: Soft rubber, softened water spray for eye protection

Dust cap: PP, removed automatically when wish is operated

Switch: automatic trigger locking for easy hand-free use

Valve: none- return valve, shut off automatically

Hose: length 105 m, PVC with stainless steel wire braided

All the above component must include accordance with the international specification

Size mm850×700×3000
Socket four Socket
Sink

 One Epoxy sink

(465×395×300 mm)

Fitting

 Two Faucet of 3 way

Two-way gas Faucet

Pegging Board Two PP Pegging Board
Eye Washing One Eye Washing

 

 

 

 

 

 

 

6th

 

 

 

 

 

 

 

 

 

 

Instrument bench

1.     The metal Frame

C- Shaped frame, made from mild steel tube (60×40×1.5 mm) thickness  and must be hidden, coating with epoxy resin powder, have excellen resistant to a wide variety of chemical and reagent. Furthermore heat resistant even to liquid solder

2.     Table work top

Should be made up of Epoxy (black) resin 15 mm thickness, excellent resistant to a wide variety of chemical and reagent such as concentrated inorganic acids, organic acids, alkali, peroxide and organic solvent, in addition to reagent such as Giemsa, Gentian stain and cresol red. All these items will be tested.

3.     Base cabinet

a)          made from 18mm thick melamine plywood edged 3mm PVC in inter and outer of the cabin and shelf, 4 swivel caster in lower parts   

b)         The doors of cabins: hidden handgrip of door, can be closed automatically, fitted with the locks coated with resistant material for chemicals and hot spots.

c)          The door hinges: DTC brand, 270o, 100000 life cycle, can open and close automatically, adjusted multi-functions by 3d.

d)         Drawer Guiding Slides: good quality and without noise

e)          Socket: 6 pcs, engineering plastic material

 mm850×700×2500 Size:
Socket – Socket6
Fitting With 2 exhaust arm

 

 

7th

 

 

 Balance Table

1. Metal frame

C-Shaped frame, made from 1.0mm steel coating epoxy resin powder

2. Work top and body

Thirty six (36 mm) thickness Granite material with 20mm thice, easly clean and keep stability. The constraction provides maximum damping effect and vibration-free stability for analytical instruments scales.

3.  Base cabinet

Made from 18mm thick melamine plywood edged 3mm PVC in inter and outer of the cabin and shelf, 4 swivel caster in lower parts

Size  mm867×600×900

 

 

8th

 

Filling Cabinet

Size  mm2000×500×900

Base cabinet: the same of materials for base cabins in slide bench, 18 mm plywood

Frame: 1.2 mm thickness imported cold rolling steel, welding point is polished and antirust treating

Window: Toughened safety glass of 5mm thickness

Shelf:Four shelves

 

9th

 

Glassware Cabinet

Size  mm2000×500×900

Base cabinet: the same of materials for base cabins in slide bench, 18 mm plywood

Frame: 1.2 mm thickness imported cold rolling steel, welding point is polished and antirust treating

Window: Toughened safety glass of 5mm thickness

Shelf:Four shelves

 

 

10th

 

 

 

 

FUME HOOD

Frame 1.0 mm Steel
Size:  1800 mm X 850 mm X 2350 mm, Epoxy worktop with sink, service fitting for cold water non process, spout, light assembly, Electrical group for fume cupboard  2 x electrical sockets GB 230V 13A, Auto protect & Under Bench Pedestal Mounted cabinet with l/r doors .cabinets:1.2 mm Cold-rolled steel plate with epoxy powder coated  , Including Under bench acid/base cabinet, 4 Electric supply 220v 50/60 Hz, Motor fan
Size mm2350×850×1500
Base cabinet The same of base cabins in slide bench
Table top 15±1 mm Epoxy special materal
Socket 2- Socket
Sink

1 Epoxy sink

440×340×280 mm

Fitting

2 one-way water Faucet

2 one-way gas Faucet

 

 

 

11th

 

 

Universal Exhausted Hood

1.   Tube: 3 joints tube, 1600 mm

2.   PP hose

3.   central connection joint: Stainless steel, high grade PP, to be 360 degree swiveled

4.   supported spring: Stainless steel,

5.   Guiding ring: low-friction treated rubber

6.   Gas skirt : Diameter 375*120mm

7.   material: Dent resistant PP

8.    Model: circle and half bowel structure

 

 

12th

 

 

Wall Cabins

Size mm600×500×800

1.     Cabinet: made from 18mm thick melamine plywood edged 3mm PVC in inter and outer of the cabin

2.     window: gleass of 5 mm thickness

3.     Shelf: two steel shelves, coating the epoxy resin with excellent chemicals resistant feature

 

13th

 

Swivel Chair

 

Seat materials: PU seat, circle shape with metal surround

Adjustable high scope of the body: 440MM-600MM

Support Equipment: 360o swivel stain resistant, pneumatic Adjustment

Foot: five star steel plate chrome to take a turn

 

B: PREPRATION ROOM                

 

 

Model No.

 

Item

 

Specification (L*D*H)

 

 

 

 

 

 

 

 

 

 

 

 

1st

 

SLIDE BENCH

 

1.     Metal Frame

C- Shaped frame, made from mild steel tube (60×40×1.5mm) thickness  and must be hidden, coating with epoxy resin powder, have excellen resistant to a wide variety of chemical and reagent. Furthermore heat resistant even to liquid solder

2.     Table work top

Should be made up of Epoxy (black color) resin 20 mm thickness, excellent resistant to a wide variety of chemical and reagent such as concentrated inorganic acids, organic acids, alkali, peroxide and organic solvent, in addition to reagent such as Giemsa, Gentian stain and cresol red. All these items will be tested.

3.     Base cabinet

a)     made from 18mm thick melamine plywood edged 3mm PVC in inter and outer of the cabin and shelf, 4 swivel caster in lower parts

b)    The doors of cabins: hidden handgrip of door, can be closed automatically, fitted with the locks coated with resistant material for chemicals and hot spots.

c)     The door hinges: DTC brand, must be open and close automatically, adjusted multi-functions by 3d.

d)    Drawer Guiding Slides: good quality and without noise

e)     Socket: 4 pcs, engineering plastic material

 

All the above component must include accordance with the international specifications

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2nd

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SLIDE

BENCH

WITH SINK

1.     The metal Frame:

C- Shaped frame, made from mild steel tube (60×40×1.5 mm) thickness  and must be hidden, coating with epoxy resin powder, have excellen resistant to a wide variety of chemical and reagent. Furthermore heat resistant even to liquid solder

2.     Table work top:

Should be made up of Epoxy (black color) resin 15 mm thickness, excellent resistant to a wide variety of chemical and reagent such as concentrated inorganic acids, organic acids, alkali, peroxide and organic solvent, in addition to reagent such as Giemsa, Gentian stain and cresol red. All these items will be tested.

3.     Base cabinet:

a)     made from 18mm thick melamine plywood edged 3mm PVC in inter and outer of the cabin and shelf, 4 swivel caster in lower parts

b)    The doors of cabins: hidden handgrip of door, can be closed automatically, fitted with the locks coated with resistant material for chemicals and hot spots.

c)     The door hinges: DTC brand, 270o, 100000 life cycle, can open and close automatically, adjusted multi-functions by 3d.

d)    Drawer Guiding Slides: good quality and without noise

e)     Socket: 4 pcs, engineering plastic material

f)      Epoxy Sink 465×395×300 mm, high grade PP, resistant to most chemicals, such as Aqua Regia, max thickness to 7mm don’t distort. Accessories: high grade PP over flow, stopper, filter-PP Basket trap.

–        Facute: (2 Faucet of 3 way (cold and Hot water) body: sold brass, coating high gloss epoxy powder, resistant to most chemicals, UV fading heating

–        Pegging Board: 2 piece outer diameter 400*120*550mm, high grade PP materials, single faced type

 

 

 

 

 

 

 

 

 

 

 

 

2nd

 

 

 

 

 

 

 

 

 

 

 

SLIDE

BENCH

WITH SINK

–        Gas Outlet: 2 pcs, 2 way, body: solid brass, coating high gloss epoxy powder, resistant to most chemicals, UV fading, heating

–        Eye washer: solid brass, coating high gloss epoxy powder, resistant to most chemicals, UV fading, heating,

Spray head: Soft rubber, softened water spray for eye protection

Dust cap: PP, removed automatically when wish is operated

Switch: automatic trigger locking for easy hand-free use

Valve: none- return valve, shut off automatically

Hose: length 105 m, PVC with stainless steel wire braided

All the above component must include accordance with the international specifications

Size mm850×700×3000
Socket four Socket
Sink

 One Epoxy sink

(465×395×300 mm)

Fitting

 Two Faucet of 3 way

Two-way gas Faucet

Pegging Board Two PP Pegging Board
Eye Washing One Eye Washing

 

 

 

 

3rd 

 

 

 

Filling Cabinet

Size  mm2000×500×900

Base cabinet: the same of materials for base cabins in slide bench, 18 mm plywood

Frame: 1.2 mm thickness imported cold rolling steel, welding point is polished and antirust treating

Window: Toughened safety glass of 5mm thickness

Shelf:Four shelves

 

 

4th

 

Glassware Cabinet

Size  mm2000×500×900

Base cabinet: the same of materials for base cabins in slide bench, 18 mm plywood

Frame: 1.2 mm thickness imported cold rolling steel, welding point is polished and antirust treating

Window: Toughened safety glass of 5mm thickness

Shelf:Four shelves

 

 

 

 

5th

 

 

Universal Exhausted Hood

1.   Tube: 3 joints tube, 1600 mm

2.   PP hose

3.   central connection joint: Stainless steel, high grade PP, to be 360 degree swiveled

4.   supported spring: Stainless steel,

5.   Guiding ring: low-friction treated rubber

6.   Gas skirt : Diameter 375*120mm

7.   material: Dent resistant PP

8.     Model: circle and half bowel structure

 

 

 

 

6th

 

 

Wall Cabins

Size  mm600×500×800

1.      Cabinet: made from 18mm thick melamine plywood edged 3mm PVC in inter and outer of the cabin

2.      window: gleass of 5 mm thickness

3.      Shelf: two steel shelves, coating the epoxy resin with excellent chemicals resistant feature

 

 

جدول (3) : نسبة المقاومة للبنشات المستخدمة في المعامل

ITEM RESULTS GRADE

INORGANIC ACID

95% H2SO4 Small stain and light damage on surface GOOD
37% HCl No change on material surface No Effect
40% HNO3 No change on material surface No Effect
ORGANIC ACID 99% CH3COOH No change on material surface No Effect
ALKALI 40 % NaOH No change on material surface No Effect
PEROXIDE 10% H2O2 No change on material surface No Effect

ORGANIC ACID

99% C2H3OH No change on material surface No Effect
99% CH3COCH3 No change on material surface No Effect
99% CH2Cl2 No change on material surface No Effect
99% (C2H5)2O No change on material surface No Effect
99% C8H10 No change on material surface No Effect
ALCONOX (Lab Detergent) No change on material surface No Effect
Enhanced valeraldhyde disinfector 2% No change on material surface No Effect
Sterile pack fluid No change on material surface No Effect
Giemsa bloodstain giemsa No change on material surface No Effect
Cresol red No change on material surface No Effect

الاحتياطات الواجب اتخاذها للحفاظ على الاثاث المعملي

إستخدم Balance Table عند أخذ أو وزن المواد الكيميائية الصلبة

إستخدم Fume Hood عند سحب المحاليل والاحماض الكميائية

إستخدم Island Bench عند إجراء التجارب التي تتطلب أحماض ومحاليل مخففة

إستخدم Instrument Bench عند العمل على الاجهزة المعملية

الاثاث المكتبي والمعدات اللازمة للتنظيم الإداري للمعمل

جدول (4): يوضح التجهيزات اللازمة للتنظيم الاداري للمعمل

م الصنف الابعاد الوحدة الكمية
1 مكتب 1500 * 1000*700 mm عدد 1
2 كرسي مكتب // 1
3 دولاب مكتبي (ارشيف) 1000 * 600*900 mm // 1
4 ملف التجارب العملية A4 File // 1
5 ملف كاتالوجات الاجهزة المعملية A4 File // 1
6 ملف المواد الكيميائية والاصباغ A4 File // 1
7 ملف الزجاجيات والمعدات المعملية A4 File // 1
8 ملف نماذج الاستهلاك والكسر A4 File // 1
9 ملف للتسليم والاستلام A4 File // 1
10 ملف كشوفات الجرد السنوي A4 File // 1
11 ملف النشرات والتوجيهات A4 File // 1
12 ملف طلبات المواد الكيميائية والزجاجيات A4 File // 1
13 ملف الجداول الدراسية العملية A4 File // 1
14 ملف نماذج مختلفة A4 File // 1